Zmień figurę

Ułóż tangram, który widzisz na rysunku w oknie obok.

Wskazówka

Wykorzystaj wszystkie figury.
Powinny one leżeć obok siebie,
nie mogą na siebie nachodzić.
Za pomocą myszy możesz przesuwać figury.
Za pomocą niebieskich punktów możesz je obracać.

n = 1 (slider from 1 to 10, step 1)
A = (-3.588, 0.064)
B = (1.2792, 0.064)
C = (-3.708, -1.236)
D = (1.1592, -1.236)
E = (-3.148, -0.976)
F = (1.7192, -0.976)
G = (-3.748, -0.696)
H = (1.1192, -0.696)
I = (-3.468, -0.816)
J = (1.3992, -0.816)
K = (-3.428, -0.616)
L = (1.4392, -0.616)
M = (-2.808, -1.816)
N = (2.0592, -1.816)
O = (-2.828, -0.256)
P = (2.0392, -0.256)
Q = (-3.088, -0.396)
R = (1.7792, -0.396)
S = (-2.9480000000000004, -2.256)
T = (1.9191999999999982, -2.256)
U = (-1.3, -5.776)
V = (4.22, -5.776)
W = (-2, 5)
Z = Point(Circle[W, 4.9399999999999995])
A_1: W + (0.502024291497976 * Vector[W, Z]) + (-0.506072874493928 * OrthogonalVector[Segment[W, Z]])
t1, a_1, w, z_1 = Polygon(W, Z, A_1)
B_1 = (2.96, 5.04)
C_1 = Point(Circle[B_1, 1.7819090885900997])
D_1: B_1 + (1.99206349206349 * Vector[B_1, C_1]) + (0.992063492063493 * OrthogonalVector[Segment[B_1, C_1]])
E_1: B_1 + (1.00793650793651 * Vector[B_1, C_1]) + (0.976190476190477 * OrthogonalVector[Segment[B_1, C_1]])
q1, b_1, c_1, d_1, e_1 = Polygon(B_1, C_1, D_1, E_1)
F_1 = (1.72, 3.74)
G_1 = Point(Circle[F_1, 1.739540169125163])
H_1: F_1 + (0.99153998678123 * Vector[F_1, G_1]) + (1.04058162590879 * OrthogonalVector[Segment[F_1, G_1]])
t2, h_1, f_1, g_1 = Polygon(F_1, G_1, H_1)
I_1 = (-2, 5)
J_1 = Point(Circle[I_1, 5.020039840479355])
K_1: I_1 + (0.500015872511984 * Vector[I_1, J_1]) + (0.49601599949208 * OrthogonalVector[Segment[I_1, J_1]])
t3, k_1, i_1, j_1 = Polygon(I_1, J_1, K_1)
L_1 = (0.5, 2.44)
P_1 = (3.04, 2.48)
M_1 = Point(Circle[L_1, 1.7678235206037962])
N_1: L_1 + (0.992064507871497 * Vector[L_1, M_1]) + (1.00806348393703 * OrthogonalVector[Segment[L_1, M_1]])
O_1: L_1 + (-0.0079354921285039 * Vector[L_1, M_1]) + (1.00806348393703 * OrthogonalVector[Segment[L_1, M_1]])
q2, l_1, m_1, n_1, o_1 = Polygon(L_1, M_1, N_1, O_1)
S_1 = Point(Circle[P_1, 3.6062723136224752])
Q_1: P_1 + (0.507796881247502 * Vector[P_1, S_1]) + (0.488204718112755 * OrthogonalVector[Segment[P_1, S_1]])
t4, q_1, p_1, s_1 = Polygon(P_1, S_1, Q_1)
U_1 = (-0.74, 1.16)
R_1 = Point(Circle[U_1, 1.7961069010501574])
T_1: U_1 + (-0.00793552386856807 * Vector[U_1, R_1]) + (0.99218846869188 * OrthogonalVector[Segment[U_1, R_1]])
t5, t_1, u_1, r_1 = Polygon(U_1, R_1, T_1)
a = true